Safety

Equipment to keep your project safe

Bierer PD800W

The Meter Probe features a Large Easy-to-Read Digital Display with Backlight
Both Probes are Impact and Water Resistant, Designed to withstand Wear
Requires No Interconnecting Cable between Probes
Requires No Extension Resistors
Both Probes are Completely Shielded to Minimize Stray Field Interference
Cordless Phasing Tool Direct Contact from 120V - 69kV, Distribution Systems
Cordless Phasing Tool(Degree Position Only) Non-Contact from 69kV - 800kV, Transmission/Substation Systems
Phase URD Systems
Phase Capacitive Test Points on URD Elbows

Hastings 6722 Wireless Phasing Meter

The Phase-Tell III is a battery powered, two-piece wireless phasing tool
communicate up to three hundred feet apart
Both units are identical, no need to identify transmitter or receiver
Voltage range from URD test points to 500KV
Both units confirm the same phase readings
Rugged extruded aluminum enclosure
Includes carrying case and instructions
URD bushing adapters and case available

Hastings 6702 Wireless Phasing Meter

Instrument for measuring overhead and underground voltages.
Three modes of operation AC, Hi-Pot, and DC.
0-40KV meter up to 240KV with resistors.
Automatically adjust voltage display to match resistors if used.
Hi-Pot mode for testing URD Cable.
In Hi-Pot mode bar graph marks the peak voltage while cable is being charged.
0-4KV DC
Large easy to read digital meter and analog bar graph.
Meter reads to nearest 100 volts

HDE TAG 5000

Range of operation is more than 33' through the air - over 1,000' along overhead conductors
No connecting cord between transmitter and receiver
Built-in universal splines for hotstick attachment
Rugged and lightweight design
Both transmitter and receiver powered by 9V lithium or alkaline battery
Audible and visual indications
All-Check self-test feature for verifying proper operation prior to use
Phase through walls and metal enclosures
Phase conductors on system voltages up to 230kV (phase-to-phase)
Can be used on 50Hz and 60Hz systems

HDE DVM-25T

Range 0-25
Length with OH Probe 18"
Capacitive test point mode
Hotstick required
RMS voltage measurements up to 80kV AC/DC
Large auto-ranging LCD (models DVM-I through DVM-V)
Back lit display for low light conditions
Coiled connecting cord is standard
Peak hold and track modes (models DVM-I through DVM-IV)
Universal splines for standard hot stick attachment

Pfisterer Ground Set Cluster

High resolution of 1 mΩ, ideal for large earth (ground) systems
Versatile tests modes
High accuracy for earth (ground) electrode grid and soil resistivity tests
Automatic test frequency selection, with filters and high current features
Diagnostic trace display

Request Quote

Lets us help you find the right equipment for the job.

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Visit Us

Come by the office anytime during working hours.