Pressure

• Pressure ranges to 60,000 psi (4,200 bar)
• 0.05%FS, 0.1%FS or 0.25%FS accuracy
• Fully temperature compensated accuracy
• IP67 (submersible in 1 meter of water)
• Optional data logging and wireless (680W)
• ISO 17025-accredited calibration w/data included

• 0 to 18 psig
• Squeeze-Bulb design
• Accurate to ±1.5%
• Check-Valve thumb screw provides pressure lock and relief
• Threaded fitting allows for quick and easy connection to unit being tested

‍

• Submersible: Sealed against dust and water
• Shock-resistant: Survives falls with no affect on accuracy
• Marine-grade construction: patented nickel-plated housing
• Includes calibration reminders and alerts
• Weather-proof enclosure resists corrosion
• Temperature compensated from 14 to 122°F (-10 to 50°C)
• One "of reading" range replaces multiple "of scale" gauges

• Wide pressure range can measure vacuum and pressure up to 5000 psi (300 bar)
• Indicates milliamps to calibrate transmitters
• Ultra compact and light
• Very easy to learn and use
• Battery operated
• Brings laboratory accuracy to outdoor field conditions

• More than 50 pressure modules to choose from
• A complete family of precision pressure modules
• Covers workloads from 1 inH20 to 10,000 psi (2.5 mBar to 690 bar)
• 8 intrinsically safe models for use with Fluke 718EX or 725EX
• Reduce errors by digitally sending measurements to calibrators
• Precision measurements with reference uncertainties up to 0.01%

• Thermal Protection: YES
• Operating Voltage: 100-110/220-240; 100-115/208-230
• Regulatory Approval: cURus, CE
• Vanes: 4
• Flow‎ @ 50hz: 8.5 cfm ( 14.44 m³h )
• Flow @ 60hz: 10 cfm ( 16.99 m³h )
• Max Pressure: 10 psi ( 0.69 bar )
• Max Pressure @ 50hz: 10 psi ( 0.69 bar )
• Max Pressure @ 60hz: 10 psi ( 0.69 bar )
• Max Vacuum @ 50hz: 26 in-hg ( 880.46 mbar )
• Max Vacuum @ 60hz‎: 26 in-hg ( 880.46 mbar )
• Weight: 47 lbs ( 21.32 kg )
• Duty Cycle: 100%

• Portable Verification Of Proper Rapid Pressure Rise Relay Operation
• Allows Simple “Go/No-Go” Field Testing Of All Qualitrol RPRRs
• Rugged Case With Shoulder Strap For Carrying Unit Into The Field
• Rugged Carrying Case Feature Integrated Components For Field Testing
• Pressure Gauge, Power Supply, Test Lights And Operation Buttons Integrated Into Case
• Setup And Test Instructions Permanently Affixed To Inside Of Case

• Generate either +125 PSI (8.6 bar) pressure or -23 InHg (584 mm Hg) vacuum with the same pump
• Unique design allows the user to convert from pressure to vacuum by simply twisting a knob, even with gloves on
• Two outlet ports allow connection to reference pressure gauge or pressure calibrator as well as device under test, thus eliminating a tee
• Large volume fine adjustment piston provides precise control, even at very low pressures
• Precisely vent pressure with soft seated bleed valve

‍

• Pressure Source: Nitropak Portable Nitrogen Source
• Pressure Reference: LC10 pressure gauge, 3000 psi / 200 bar / 20 MPa, 1/4" Male NPT bottom connection
• Reference Connection: 1/4" female NPT x female Quick-test, no check-valve, brass
• Process Connection 1: 1/4" male NPT x male Quick-test, no check-valve, brass
• Process Connection 2: 1/4" male NPT x male Quick-test, no check-valve, brass
• Hose 1: Quick-test 6900 psi hose, brass hose ends, 6 ft (1.83 m) long
• Hose 2: Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long

• Lightweight and easy to use — weighs only 1.4 kg, and with the pressurized section located below the reservoir, it’s well balanced and easy to hold and pump with one hand
• Extremely durable — the liquid reservoir is highly resistant to shock, extreme temperature and chemical exposure, and it’s far less prone to shattering. Sturdy metal handles won’t wear out or break when dropped
• Easy to disassemble and repair with standard hand tools
• Machined from solid, stainless steel preventing pressure leaks common in housings made from cast material and ensuring consistent, stable pressure
• Includes Ralston Quick-test adapters and hoses for quick & efficient connection
• Compatible with most liquids
• Pump comes fitted with a fill plug with over pressure relief for easy set up

‍

• Lightweight and easy to use — weighs only 1.4 kg, and with the pressurized section located below the reservoir, it’s well balanced and easy to hold and pump with one hand
• Extremely durable — the liquid reservoir is highly resistant to shock, extreme temperature and chemical exposure, and it’s far less prone to shattering. Sturdy metal handles won’t wear out or break when dropped
• Easy to disassemble and repair with standard hand tools
• Machined from solid, stainless steel preventing pressure leaks common in housings made from cast material and ensuring consistent, stable pressure
• Includes Ralston Quick-test adapters and hoses for quick & efficient connection
• Compatible with most liquids
• Pump comes fitted with a fill plug with over pressure relief for easy set up.

‍